回答

收藏

MMOexp ARC Raiders: Install a LiDAR Scanner on Spaceport

问答 问答 22 人阅读 | 0 人回复 | 2026-01-23

The most dangerous part of the quest is placing a LiDAR Scanner at the top of the Control Tower on the Dam Battlegrounds map. This POI is a notorious hotspot for PvP, largely because it contains valuable locked rooms that draw heavily geared players.

Approaching the Control Tower from the south is one of the safer options. Look for a staircase running up the side of the building and climb the first three flights of stairs, stopping at the main floor instead of going all the way up.

From there, move along the long outdoor hallway and enter the door at the far end. Inside, continue straight until you reach a breachable door. If another player has already passed through, it may be open. Otherwise, breach it quickly and stay alert.

Beyond the door, you'll see ziplines leading upward. Before using them, look straight up and destroy any wall-mounted turrets, as they can quickly eliminate you while you're ascending.

If the turrets are gone, it likely means another player has already been through. This can be dangerous, as players often place traps near the top of the zipline. If you trigger one, calling out that you're just questing may help-though some encounters will still turn hostile.

Once upstairs, ignore the nearby key room and continue through the corridor until you reach another breachable door at the top of a stairwell. Open it to access the Control Tower roof.

On the roof, head slightly forward and to the left to find a tripod. Interact with it to place the LiDAR Scanner and complete this portion of the quest. When finished, take the zipline back down-but be cautious, as other raiders may be waiting below.

Install a LiDAR Scanner on Spaceport – Communications Tower

The Spaceport objective is by far the easiest and safest of the three. Head to the Communications Tower on the eastern side of the Spaceport map.

This area rarely sees much player traffic, making it an ideal low-risk objective. Upon arrival, locate the yellow ladder attached to the tower and climb upward until you reach a small platform.

On the platform, you'll find another tripod. Interact with it to place the LiDAR Scanner. With that done, climb back down and extract whenever you're ready.

Install a LiDAR Scanner on Buried City – Galleria Sign

The final LiDAR Scanner must be installed on top of the Galleria sign on the eastern side of Buried City. This objective requires a zipline, and incorrect placement can easily result in a fall.

Approach the Galleria from the south and climb onto the square rooftop structures just below it. From there, cross a makeshift bridge that leads onto the Galleria rooftop.

Once on the rooftop, use your zipline to connect to the upper portion of the Galleria sign. Attaching the zipline too low-such as onto the railing-will cause you to fall instead of landing on the platform.

Ride the zipline upward, and be prepared to jump slightly at the end to land correctly. Overshooting the platform can result in serious fall damage.

At the top, interact with the tripod to place the final LiDAR Scanner. While you're up there, check for a weapon case, which often spawns nearby and can contain valuable ARC Raiders Items.

Every player needs a lot of ARC Raiders Coins, I suggest you go to a third-party website like MMOexp.com to buy, safe and comfortable transactions, and years of experience to ensure the security of your account.
韩窝窝.com
分享到:
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

11 积分
3 主题
+ 关注
新帖/最新回复